/* Include file of error messages and codes.  */
/* Generated by GENMESS Version 1.0 (UNIX) on Fri Mar 11 10:18:13 1994 */




/* .TITLE  ERROR symbols for Status Returns in RD13 libraries calls */
/* .IDENT  "Version 2.1" */
/* .FACILITY RD13_LIB,^X100/PREFIX=RD13_ */


/* .BASE 5000 */
/* .SEVERITY SUCCESS */
#define RD13_FLAGS_WASCLR 0x09009c41  /* "Operation completed successfully. The flag state was clear" */

/* .BASE 5100 */
/* .SEVERITY WARNING */


/* .BASE 5200 */
/* .SEVERITY ERROR */


#define RD13_PROBE_FAILED 0x0900a282  /* "VME probe access failed" */
#define RD13_NOHASH_SPACE 0x0900a28a  /* "Hash table full. Reconfigure Module" */
#define RD13_NOT_IMPLEMENTED 0x0900a292  /* "Function not implemented on this architecture" */
#define RD13_INVAM 0x0900a29a  /* "Invalid/Unsupported VME/VSB address modifier" */
#define RD13_AM_MISM 0x0900a2a2  /* "VME/VSB Phys address inconsistent with the address modifier" */
#define RD13_TOO_PAGES 0x0900a2aa  /* "Requested Space is too big: contiguous pages not available" */
#define RD13_BAD_SIZE 0x0900a2b2  /* "Invalid Size: must be a multiple of (4 Bytes) words" */
#define RD13_SVICOPEN_FAILED 0x0900a2ba  /* "Cannot map Svic device" */
#define RD13_SVICCLOSE_FAILED 0x0900a2c2  /* "Cannot close Svic Device" */
#define RD13_NOT_MAPPED 0x0900a2ca  /* "No VME/VSB Space mapped at this address" */
#define RD13_UNMAP_FAILED 0x0900a2d2  /* "Svic Unmap failed" */
#define RD13_SEG_NOT_EXT 0x0900a2da  /* "Segment not created on remote VME processor" */
#define RD13_OPEN_FAILED 0x0900a2e2  /* "File Open failed" */
#define RD13_NOT_REMOVED 0x0900a2ea  /* "Segment not removed on VME processor" */
#define RD13_SLAVE_ENABLED 0x0900a2f2  /* "VME/VSB Slave Port already enabled" */
#define RD13_SLAVE_DISABLED 0x0900a2fa  /* "VME/VSB Slave Port already disabled" */
#define RD13_INVLEVEL 0x0900a302  /* "Invalid VME Interrupt Level" */
#define RD13_INV_VECT 0x0900a30a  /* "Invalid/Unsupported Interrupt Vector" */
#define RD13_NOT_ATTACHED 0x0900a312  /* "The Status ID has never been attached to a user function" */
#define RD13_FREE_FAILED 0x0900a31a  /* "Cannot deallocate Svic File Descriptor Set" */
#define RD13_SELECT_FAILED 0x0900a322  /* "Select error from Svic Device Driver" */
#define RD13_TIME_OUT 0x0900a32a  /* "Interrupt has not occured::time out" */
#define RD13_EVT_NOTALLOCATED 0x0900a332  /* "No free semaphore available" */
#define RD13_FLAGS_ALRINIT 0x0900a33a  /* "Flags_initialise has already been done" */
#define RD13_FLAGS_NOMEM 0x0900a342  /* "The number of allocatable flags is exhausted (current limit 32)" */
#define RD13_FLAGS_INVARG 0x0900a34a  /* "The parameter flag or how is not a valid parameter" */
#define RD13_FLAGS_WOULDBLOCK 0x0900a352  /* "No interrupt occurred" */
#define RD13_HIPPI_NOT_AVAIL 0x0900a35a  /* "The Rio/HiPPI source interface is not available to the user" */
#define RD13_HIPPI_BAD_STATUS 0x0900a362  /* "The Rio/HiPPI source interface has been found in a incorrect status" */
#define RD13_HANGUP_TIME_OUT 0x0900a36a  /* "Hangup timeout on the Rio/HiPPI source interface" */
#define RD13_HANGUP_BY_DEST 0x0900a372  /* "Hangup by destinationon the Rio/HiPPI source interface" */
#define RD13_TRANSF_TIME_OUT 0x0900a37a  /* "Transfer timeout on the Rio/HiPPI source interface" */
#define RD13_INTERCONNECTION_LOST 0x0900a382  /* "The interconnection has been lost on the Rio/HiPPI source interface" */
#define RD13_FPSM_STATUS_UNKNOWN 0x0900a38a  /* " The FPSM status of the Rio/HiPPI source interface is unknown" */
#define RD13_ANSW_INDICATE_REJECT 0x0900a392  /* "Answer indicate reject on the Rio/HiPPI source interface" */
#define RD13_RING_REQUEST_TIME_OUT 0x0900a39a  /* "Ring Request Timeout on the Rio/HiPPI source interface" */
#define RD13_NOT_ENOUGH_SPACE 0x0900a3a2  /* "The Rio/HiPPI source interface has not enough space to allocate" */
#define RD13_TOO_MANY_USERS 0x0900a3aa  /* "There are too many users for the Rio/HiPPI source interface" */
#define RD13_WRONG_USER_ID 0x0900a3b2  /* "The user ID for the Rio/HiPPI source interface is incorrect" */
#define RD13_UNKNOWN_ERROR 0x0900a3ba  /* "Unknown error for the Rio/HiPPI source interface" */
#define RD13_LENGHT_TOO_BIG 0x0900a3c2  /* "The lenght of the event is too big for the user of the Rio/HiPPI source interface" */
#define RD13_MEM_ALL_TIMEOUT 0x0900a3ca  /* "Memory allocation timeout on the Rio/HiPPI source interface" */
#define RD13_MEM_TRANSF_WAIT_TIMEOUT 0x0900a3d2  /* "Memory transfer wait timeout on the Rio/HiPPI source interface" */
#define RD13_INT_LEVEL_NOT_ALLOWED 0x0900a3da  /* "Interrupt level not allowed on the Rio/HiPPI source interface" */
#define RD13_ASK_STATUS_TIMEOUT 0x0900a3e2  /* "Timeout on the status request for the Rio/HiPPI source interface" */
#define RD13_MEM_DEALL_TIMEOUT 0x0900a3ea  /* "Memory deallocation timeout for the Rio/HiPPI source interface" */
#define RD13_RIO_VME_FIFO_FULL 0x0900a3f2  /* "Rio/HiPPI source interface VME FIFO full" */
#define RD13_INCORRECT_TRANSF_END 0x0900a3fa  /* "The transfer to the Rio/HiPPI destination interface has been incorrectly ended" */
#define RD13_ERROR_UNKNOWN 0x0900a402  /* "Unknown error for the Rio/HiPPI destination interface" */
#define RD13_INT_VECTOR_NOT_ALLOWED 0x0900a40a  /* "Interrupt vector not allowed on the Rio/HiPPI interface" */
#define RD13_WRONG_BLOCK_NUMBER 0x0900a412  /* "The block number for the Rio/HiPPI destination interface is incorrect" */
#define RD13_WRONG_MODE 0x0900a41a  /* "The mode for the Rio/HiPPI destination interface is incorrect" */
#define RD13_WRONG_RECORD_NUMBER 0x0900a422  /* "The record number for the Rio/HiPPI destination interface is incorrect" */
#define RD13_RECORD_TRUNCATED 0x0900a42a  /* "The record of this transfer has been found truncated" */
#define RD13_RECORD_INCOMPLETE 0x0900a432  /* "The record of this transfer has been found incompleted" */
#define RD13_NO_SPACE_SPECIFIED 0x0900a43a  /* "Null space specified in the memory allocation command on the Rio/HiPPI destination interface" */
#define RD13_DMA_OPEN_ERROR 0x0900a442  /* "Fail to map the internal processor memory, to open a shared memory segment or the DMA name list" */
#define RD13_DMA_CLOSE_ERROR 0x0900a44a  /* "The controller cannot detach the internal shared memory segment" */
#define RD13_DMA_TOO_MANY_CHANPIDS 0x0900a452  /* "All DMA channels are busy" */
#define RD13_DMA_ALLOCATION_FAILED 0x0900a45a  /* "Failed to allocate a DMA channel" */
#define RD13_DMA_ILLEGAL_CHANPID 0x0900a462  /* "The channel number is not allowed" */
#define RD13_DMA_TOO_MANY_MODES 0x0900a46a  /* "All the modes have already been reserved" */
#define RD13_DMA_ILLEGAL_MODE_ID 0x0900a472  /* "The mode number is not allowed" */
#define RD13_DMA_ILLEGAL_PARAMETER 0x0900a47a  /* "The parameter is not allowed" */
#define RD13_DMA_ILLEGAL_VALUE 0x0900a482  /* "The parameter value is not allowed" */
#define RD13_DMA_NOT_SUPPORTED_PARAMETER 0x0900a48a  /* "Invalid DMA parameter" */
#define RD13_DMA_NOT_SUPPORTED_VALUE 0x0900a492  /* "Invalid DMA parameter value" */
#define RD13_DMA_ILLEGAL_BYTECOUNT 0x0900a49a  /* "The number of bytes to transfer is too large" */
#define RD13_DMA_ACTIVE 0x0900a4a2  /* "The channel has been found already active" */
#define RD13_DMA_ABORTED 0x0900a4aa  /* "The operation has been software aborted" */
#define RD13_DMA_TIMEOUT_ERROR 0x0900a4b2  /* "DMA Transfer Time Out" */
#define RD13_DMA_BUS_ERROR 0x0900a4ba  /* "There has been a bus error during the operations" */
/* .END */